customer drawing 300 constitution dr menlo park, ca 94025, u.s.a. title: stub splice sealing system unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] raychem devices document no.: d-436-58/-59 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: j date: november 3, 2010 revised by: unguyen cage code: 06090 eco number: eco-10-022537 scale: nts size: a sheet: 1 of 1 ? 2004-2009 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. dimensions of sub splicer i.d. o.d. product name color code max. weight cma range min max min max d-436-58 blue 1.4 lbs/mpcs 779- 1.63 1.75 2.57 2.69 2680 (0.064) (0.069) (0.101) (0.106) D-436-59 yellow 1.8 lbs/mpcs 1900- 2.46 2.59 3.73 3.89 6755 (0.097) (0.102) (0.147) (0.153) material 1. insulation sleeve: heat-shrinkable, radiation cross-li nked modified polyvinylidene fluoride. transparent blue. 2. meltable sealing insert: modified, immersi on resistant thermoplastic. color: natural. 3. meltable sealing insert: modified, immersi on resistant thermoplastic. color: natural. 4. seamless stub splicer: base metal: copper alloy 101 or 102 per ww-t-775. plating: tin per mil-t-10727, type 1. application 1. these parts are designed to provide an immersion resistant 2 wire stub splice, or a 2 to 1 parallel splice, made with having insulations rated for 135 q c minimum. 2. recovered dimensions of insulation sleeve (item1): i.d.: .095 (2.4130) max. wall: .013 (0.3302) min. 3. for installation procedures refer to tyco electronics/raych em?s ?miniseal d-436 series seal ed crimp splice products installa tion guidelines.?
|
